Ciao a tutti,
da febbraio uscirà questo nuovo modello della Outrage e già qualche utente lo ha preordinato
cosa ne pensate?
Dalle foto mi sembra molto ben fatto anche per il suo passo +15/-15 ed il piatto sia a 120 che 140 CCPM.
Commenti?
SPECIFICHE:
Length: 1219mm, Height: 368mm , Width: 203mm
Main Rotor Blade Size 600-640mm
Main Rotor Diameter: 1355mm -1425mm
Tail Blade Length: 95mm
Tail Rotor Diameter: 250mm
Main Gear ratio: varous
Tail Rotor Ratio 4.583:1
RTF weight 3.2kg-3.6kg (7-8lbs) depending on electronics used
FEATURES:
1. Head System
Fully adjustable head allowing multiple setups from high stability to maximum agility making it perfect for the beginner to advanced pilot
CNC 7075-T651 American alloy on critical head support parts requiring ultra rigidity
CNC 6061-T651 American alloy for head parts requiring stability
Dual ball raced seesaw support in center hub
Dual ball raced radius arms for precision control
Extra long washout base for increased lever stability
Dual ball raced 120/140 CCPM swash plate
Achievable pitch range of +15/-15 degrees of pitch
High quality screw hardware
10mm Hollow hardened main shaft
8mm Spindle shaft
Stainless steel 4.75mm OD Linkage balls.
One piece dampers
All parts are run on brand new Ultra High precision 5-axis CNC machines
2. Frame System
Ultra compact frame technology for superior frame rigidity
CNC 6061-T651 American alloy main shaft bearing blocks and mechanics
High quality fiber reinforced injection molded plastics
High quality screw hardware
Multiple Electronic placement options
Adjustable servo mounts for various size and brand servos
Adjustable drive train for optional gear ratios
Ultra high strength injection molded drive gears
Zero pitch alignment points for easy head setup
Optimal servo positions for increased accuracy in control
Break-away canopy tabs
Component positions mounted high in frame enhancing axial CG for improved 3D reactions
Tail servo semi concealed within the frames for a compact look
Motor mount for 25 and 30mm M3 bolt spacing, ties into main bearing block
Motor shaft pinion support for 5mm and 6mm shafts (changable bearing for 6mm)
Frame support bracket around the motor for strength
The electronics tray includes wire guides for a clean installation
New improved one way bearing assembly
0.8 Mod strong main gear
Kit includes 12T, 14T, 16T 0.8M pinions (5mm shafts)
Pinions for 5 and 6mm shafts available as spare parts (5mm: 11-16T, 6mm: 12-16T)
Battery tray removable for fast battery changes; suitable for 6 - 12 cell battery packs
Wide variety of usable motor KV's and motor dimensions
One piece plastic base tray
All parts are run on brand new Ultra High precision 5-axis CNC machines
3. Tail System
Extend boom length for improved forward flight tracking and superior tail authority in extreme 3D conditions.
New designed tail pitch control system for smooth precise control.
New compact designed tail system to reduce parts for easy maintenance yet providing slop-free tail system.
Torque tube design for efficiency.
Ultra high strength Injection molded torque tube gears.
High quality Carbon 95mm tail blades.
All parts are run on brand new Ultra High precision 5-axis CNC machines
4. Canopy
Aerodynamically formed canopy shape for enhanced flight characteristics.
Light weight construction fiberglass composites.
High quality Canomod™ airbrush fiberglass canopy.
Recommended Batteries:
This helicopter will work well on 6, 8, 10 or 12 cell LiPo packs. Different motor and pinion combinations are required for different cell count selections.
6s 5000mA
8s 37000-4200mA
10s 3200-3700mA
12s 3000-3300mA
Recommended Motors:
A motor of at least 2500 watts is required. For example the Scorpion 4025 series
6s: 1100kv
8s: 890kv
10s: 630kv
12s: 550kv
Recommended ESCs:
ESC: We recommend Castle Creations ICE (or ICE HV) series ESC’s
6s: 120A ESC
8s: 100A – 120A ESC
10s: 80A ESC
12s: 80A ESC
....
